How do you remove a carburetor from a GS1000?

1. Remove fuel tank. 2. Disconnect throttle cables 3. Remove side covers 4. Remove air-filter case under seat 5. At top of air-box (between filter box and carbs) there are 2 bolts with 10mm hex heads, remove these. 6. Remove crankcase vent hose from the air-box 7. Loosen clamps for rubber boots from air-box to carbs as well as the clamps on rubber manifolds to engine 8. Slide air-box away from carbs 9. With a rocking motion, pull carbs rearwards from engine. The carbs will come out from manifolds 10. Rock carbs with engine end pointing up, gently but firmly work the carbs out to the right side of the bike.