How do you change a radio on a 1994 Paseo for a 2004 CD Player?

It's actually fairly simple on this vehicle. The trim plate around the radio simply snaps off. Remove the plug on the back of the defroster button. There are four bolts holding the metal basket in place that contains the radio. (That's the only Word I could come up with...) Once you remove the basket, the radio is held in by four screws. You will need a new wiring harness, but you can buy that at wal-mart. You do not need any kind of mounting bracket, though. The original basket is perfect size for DIN size radio. As far as wiring the radio and the harness adapter together, the colors usually match up, but refer to the documentation with the harness and with the stereo. It's not rocket science. 8 wires in that harness cluster are for the four speakers, and the rest are Power, Ground, dimmer, remote turn on, and power antenna. That's probably about it. I would crimp those little fittings on there to connect them to the harness, or you could use wire nuts, or simply electrical tape, but whatever you use, just make sure you do it well so you don't have to do it over again later. Hope this helps.

-Tony

(Currently studying Automotive Mechanics)