Answer for USA, Canada and countries running a 60 Hz supply service.
A total of 360 degrees between openings, regardless of distance, is the NEC's limitation. From experience I know that any time you go beyond 270 degrees you are going to have a difficult pull regardless of what other steps you take.
360 degrees = 4 - 90 degree bends
270 degrees = 3 - 90 degree bends
<><><>
As always, if you are in doubt about what to do, the best advice anyone should give you is to call a licensed electrician to advise what work is needed.
Before you do any work yourself,
on electrical circuits, equipment or appliances,
always use a test meter to ensure the circuit is, in fact, de-energized.
IF YOU ARE NOT ALREADY SURE YOU CAN DO THIS JOB
SAFELY AND COMPETENTLY
REFER THIS WORK TO QUALIFIED PROFESSIONALS.
Copyright © 2026 eLLeNow.com All Rights Reserved.
