How do you bleed the front brakes on a 2008 Yamaha vstar 650?

To bleed the front brakes on a 2008 Yamaha V-Star 650, start by ensuring the bike is on a stable surface and the front wheel is off the ground. Remove the brake reservoir cap and check the fluid level, topping it off with the recommended brake fluid. Use a brake bleeder tool or a clear plastic tube connected to the bleeder valve on the caliper; open the valve and pump the brake lever until fluid flows, then close the valve before releasing the lever. Repeat this process until you see clear, bubble-free fluid, ensuring the reservoir does not run dry during the process.