How do you bleed the brakes on a 1990 dodge spirit?

To bleed the brakes on a 1990 Dodge Spirit, start by ensuring the vehicle is secure and the brake fluid reservoir is filled. Begin at the wheel farthest from the master cylinder, typically the right rear, and attach a clear hose to the bleeder valve. Have an assistant pump the brake pedal several times, then hold it down while you open the bleeder valve to release air and fluid. Close the valve before your assistant releases the pedal, and repeat this process for each wheel in the proper order (right rear, left rear, right front, left front) until the fluid runs clear without bubbles.