The Heaters don't work on your Peugeot expert?

Yeah, so the heaters simply work on your Peugeot expert.

================================================

Agreed with above BUT FIRST check the RELAY

Mine had simply FRIED because of a bad connector. Its eight pounds for a new one and wish I had tried it first before stripping down the dash and changing the heater controls.

For the benefit of doubt here is what the heater control looks like stripped out of a Peugeot Expert van.

Yes I pulled all the dash apart its not that difficult takes about half hour

You will need a special screwdriver for this type of grub screw. Note they are all the same. So once you have the tool you have access to all

Never got round to cleaning up the unit simply replaced with scrap yard second SO I will sell this part on ebay for about thirty pounds

It may well be your unit so you will need to strip it out but as I said LOOK FIRST at that relay which incidently should be GREEN for 25amp

Mine changed to black because they sold me a 40amp version

Dangerous Maybe - but will keep an eye on it. I think they only had a 40amp in stock.

But many thanks to the guys above who posted first because you got me on the right track to this one.

Richard