Can you wall mount a Craig 32 inch tv to a wall?

Yes I was able to do it after some clever thinking. I used full motion omni mount. This project is not for everyone, you must have experience with disassembling electronics. Beware because it could void your warranty, first go to hardware store and get a pack of pop toggles size 3/8. Lay tv flat on screen and start taking all the screws out that hold tv back on. One screw is hidden in middle under tv model sticker, this one is the warranty kicker, peel back very carefully to expose screw. After all screws are loose pull plastic panel back very slow to expose inside backing. Find the four holes that match up with your mount and punch out plastic inserts. Now your ready for Pop toggles, insert them into holes and make sure when they flatten out that that aren't hitting the wires by the holes. After all four are in and they look good put panel back and tighten all screws and put sticker back down. Now it's ready to mount. Do not use screws that came with toggles because they are to long. You should have extra that came with mount package. Use the small ones that fit and tighten tv to mount. Your good to go.