Brake fluid flush

Easy Job: Secure: 2 foot piece of clear tubing sized to the bleeder ports (maybe 3./16th inner dia) small glass jar 1 QT correct brake fluid (NEW unopened container) Do not get fluid in eyes , burns like heck (don't ask how I know) If no ABS then remove the brake fluid from the master sylinder with an old turkey baster and replace with fresh, make sure you use the correct flavor fluid. Go to the right rear wheel cylinder: Remove the bleeder dust cover. Use the correct size box wrench on the bleeder affix the tubing put end of tubing into glass have helper pump the pedal 3x then hold. Bleed fluid till pedal hits floor, repeat till fluid runs clean. make sure you replace the cover, it helps prevent rust and siezure of the fitting. Top up master reservoir Drivers rear next and bleed. Top up Passenger front and bleed top up drivers side front and bleed top up. Discard of the fluid properly. If you have ABS get the haynes mmanual for the car and follow the procedure.