In 10 steps how do you clean hand tools?

Each tool has its own cleaning procedures.

1. Using a wire brush/paint brush/cotton waste thoroughly brush/wipe hand tools.

2. If found rusted/corroded use proper abrasive to rub and remove rust/corrosion.

3. Apply anti-rust/corrosion agents.

4. Insert in proper casings.

5. Input anti moisture substances inside casing to absorb if humidity trapped inside.

6. Keep tool and casing in a dry place.

7. While taking for use brush/wipe out anti-rust/corrosion agents applied earlier to avoid slippage on use hence damage.

8. Try do not touch metal parts with hand to avoid sweat on parts which may cause rusting/corrosion.

9. Use gloves while cleaning hand tools.

10. Ensure cleaning is done every day before keeping it aside.