How do you remove the rear brake drums on a 2000 Ford ZX2?

With a hammer, not a joking. hit it on the back side of the top out, but please take the tire off first.

Better solution:

First take off the two screws.These are the countersunk holes with Phillips head screw. These screws are holding the drum.

The brake drum has one or two threaded holes. These are not the countersunk holes with Phillips head screw that hold the drum to the wheel flange but are in the other one or two spaces between the lug bolt holes. On my ZX2, these holes are threaded for a 1/4 inch bolt (1/2 inch wrench), 16 threads per inch. Thread a bolt at least one inch long into each hole and tighten the bolt. If your car has only one hole as does mine, tighten the bolt to apply pressure to one side of the drum, then use a pry bar to ease the other side of the drum off. The lug nut wrench with the jack makes a good pry bar for this.