How do you change the starter on a Lexus ls400 1992 model?

2JZ-GE Engine # Disconnect the negative battery cable. Wait at least 90 seconds before performing any other work. # Remove the engine undercover. # Turn the drive belt tensioner clockwise and remove the drive belt from the engine. # Disconnect the generator electrical connector. # Remove the rubber cap and nut and then disconnect the alternator wire. # Disconnect the alternator wire clamp from the wire clip on the alternator. # Disconnect the A/T coolant hoses and bracket from the alternator by removing the bolt and pipe clamp. # Remove the alternator bolt, nut, pipe bracket and then remove the alternator from the engine. To install: # Install the alternator and pipe bracket. Torque the bolt and nut to 27 ft. lbs. (37 Nm). # Install the A/T oil cooler pipes to the alternator and install the bolt and pipe clamp. # Connect the alternator wire clamp to the wire clip on the alternator. # Connect the electrical wire to the alternator and install the nut. # Install the alternator electrical connector. # Install the drive belt. # Install the lower engine cover. # Connect the negative battery cable. # Start the engine and check the charging system for proper operation