There is a portion of the dash that snaps over the radio unit. Carefully wedge your screwdriver between the section of the dash that is obviously different then the rest of the dash. You want to make sure that you don't pry back because it will leave a mark in the dash. What i did was wedge the screwdriver on the right portion of the dash and then pull horizontally toward the rear of the car. There are a couple snaps that will give way. Then wiggle the lower portion with the vents free. All that is holding the stereo in from there is 4 screws. After removing the the four screws you can pull the factory clarion unit out.
Copyright © 2026 eLLeNow.com All Rights Reserved.