How do you make a LEGO car turn?

1. Chose a car you want to make

2. Finish building the basic bottom part

3. If you want to control the car turning, you'll need to use couple LEGO sticks

4. If you make the turning wheel at front, make where the wheels are atached a rectangle that makes the wheel can be turning.

5. You MUST use the one that has a hole at the side.

6. You also MUST atache it to the cars together very tightly

7. It MUST be longer then the side of car you're making.

8. At one side of the rectangle shape, put a lego that looks like a sharp teeth at the middle and side up (put closer to the driver place).

9. After you put the teeth lego at the back of the rectangle, put one line at each side for the wheels to turn (it must be same length where you want to put the wheel).

10. The stick also must be connect together.

11. Put a long stick with a gear for the teeth at the middle of the wheel (the gear must be atached to the teeth lego, cannot be longer or shorter).

12. If the stick is not enough long, connect another stick together to the back (make it atached to the base of the car between two seats).

13. At the back, put a gear that can atache another gear that can go up (the lego stick MUST be longer at the front and the back since if you ataced it to the base, it will be harder to break apart and easier to control).

14. The two gears MUST be the same, when you're making another stick that's going up, the stick going to the back also MUST be long enough to let the stick going to the top are able to be atached together.

15. Make the stick you're letting to go up to the top just the right length.

16. After the stick is at the top, put a tear right at the top since it'll be easier for you to turn the car left or right.

17. After you're done, put on the four wheels you're using.

Note:

At the front of the car, since the gear at the front is important, you MUST connect it to more infront of a car. At the back, since you're putting two gears together, you'll also need a longer stick and connect to the back and twice for the top gear.

The turning part also MUST be spread apart for the wheel to turn, if it's not spread apart, the wheel will be straching the lego for turning.

Hope you understand this.