Remove the right rear wheel/tire. Remove the large nut and cotter key, than it is best to utilize a gear puller for this next step, if you utilize a pry bar be very careful not to scratch or damage the inner metal hub that mates to the hub seal. The hub will come off, next remove the small bolts holding the black drum cover in place. Once the outer cover is removed than the brake drum containing the wheel studs will come off. You may have to back off on your brake adjustment to get the drum off, this allows enough clearance between the shoes and drum for removal.
The main components to replace are the shoes if worn, the large o-ring seal for the drum cover, and the main hub/drum cover seal. These parts are available aftermarket a little cheaper than OEM. Try Cheapcycle parts.com, they have very good prices.
Good luck, Jim
Copyright © 2026 eLLeNow.com All Rights Reserved.
