How do you bleed 2004 Acura TSX brake system?

To bleed the brake system on a 2004 Acura TSX, start by ensuring the brake fluid reservoir is filled with the appropriate brake fluid. Begin at the brake furthest from the master cylinder, typically the right rear wheel, and have an assistant pump the brake pedal several times before holding it down. While they hold the pedal, open the bleeder valve on the brake caliper to release air and fluid, then close the valve before they release the pedal. Repeat this process for the left rear, right front, and finally the left front, checking the fluid level frequently to prevent introducing air into the system.