How do you replace a low beam headlight bulb on a 1994 Chrysler LeBaron convertible?

Open up the hood, and go in behind the fixture where the light is located. Sometimes there is an access panel on top. Open it and reach down inside and grab the bulb's socket. Twist the socket a quarter turn counter clockwise, and pull out the socket. Grab the bulb, and pull it straight out. To replace the new bulb, never touch it with your bare fingers, as this will greatly shorten the bulb's life, if it even work's at all. Use a tissue or something else in that order to handle the new bulb. Push the new bulb into the socket, put the socket back into the housing, and twist a quarter turn clockwise to secure the socket into the fixture

-> on the 1994 (1993-1995) Lebaron you have to unscrew the 4 screws each on top of the front light, remove the wire from the electric height ajustment (metal wire with bubble at the front end) to the top, pull the entire light part out of the front mask and then, you will see the rear side of the bulps.

NEVER place the glass part on top of the hood, otherwise it will fall down, crack completely and you will have to pay lots of quids to replace it...