How do you pack wheel bearing on boat trailer?

jack wheel up remove the wheel , remove the dust cover & NUT that holds the hub on, then remove the bearings, and hand pack them, put a gob of water restant grease in your hand pull the large side of the bearing thru the grease till it comes thru the other side, all around, do other bearing, then place inter bearing on shaft, small side out, push a glob of grease into the hub housing place hub on then outer bearing replace washer, &nut, tighten nut till hub will not turn, [lightly] then back off nut 1/8 turn or till cotter pin hole lines up. replace dust cap.