How do you replace the rear wiper on an Acura MDX?

1 answer

Answer

1098037

2026-03-19 08:45

+ Follow

This will vary depending on what year Acura MDX you are speaking of. 2001-2006 will require that you buy a factory replacement or buy a refill (just the rubber squeegee). In either case, the factory blade or the refill will come with illustrated instructions.

The newer 2007 and beyond MDX's take a special 12" rear wiper blade for the special rear arm. Your dealer will have them (may be expensive) or you may want to look into "Trico Exact Fit Rear Integral Blades" that fit these new special arms - you can find them online. (there may be others available too)

The good news is - specialized rear arms do not automatically mean the wiper blade is difficult to change - it just means you need to get the right blade for easy (and successful) installation.

Correct replacement windshield wiper blades are not only correct length, but also correct attachment. Never just buy by length only. Always lookup your vehicle in an application guide at the store or now-a-days you can 'lookup wiper size' online. The key to an easy install is correct size/correct part numbers.

The new replacement wiper will have step-by-step, illustrated instructions for removal and installation. Take your new wiper blade and instructions out to your vehicle and physically get the old and new wipers in your hands and take a look. The instructions will make 100% sense once you're looking and touching them.

Most wiper replacements snap off and on, do not require tools and take approximately 2-15 minutes.

ReportLike(0ShareFavorite

Copyright © 2026 eLLeNow.com All Rights Reserved.