What was the difference between the Ford Model T and Model B?

The Ford Model T (colloquially known as the Tin Lizzie and the Flivver) was an automobile produced by Henry Ford's Ford Motor Company from 1908 through 1927. It is generally regarded as the first affordable automobile, the car which "put America on wheels"; this was due to some of Ford's innovations, including assembly line production instead of individual hand crafting, as well as the concept of paying the workers a wage proportionate to the cost of the car, so that they would provide a ready made market. The first production Model T was built on September 27, 1908 at the Piquette Plant in Detroit, Michigan. The designation Ford Model B, like Ford Model A, was actually used for two different automobiles. The first was produced in 1904-05 and is among the earliest Ford Motor Company products. The second Model B was an improvement of the second Model A and entered production for the 1932 model year. Strictly speaking the Model B was a four-cylinder car, but it was at this time that Ford began producing a very similar car with Ford's new Flathead V8 engine. The V8 car was marketed as a Model 18, though it is commonly called the Ford V-8 today, and was virtually indistinguishable from the Model B. ------------------------------------------------------------------------------------------------------------

When i tell people this is a B-Ford engine, They always ask whats the difference is between an A and a B Ford engine. Well here it goes> The 1932 V-8 was introduced as the 'Ford Model 18.' The four cylinder model was designated the 'Model B.' Although the V-8 was a national sensation and sold very well, there were many four cylinder Model B's produced. Compression of the Model B engine was 4.8; the A was 4.2. The Model B engine produced 50 hp at 2800 rpm; the A produced 40 hp at 2200 rpm. The Model 'B' mains were 2" diameter; mains in the 'A' were 1-5/8". 'B' rods were 1-7/8"; A rods were 1-1/2". The 'B' camshaft provided an increase in valve timing duration which contributed to the 50 hp at 2800 rpm. A diaphragm type fuel pump was mounted to the lower right side of the engine block. The water pump mounted with three bolts instead of four. The oil pump forced oil directly to the main bearings under mild pressure. Along with other valve chamber modifications, the oil return pipe was eliminated. Model 'C;' The 1932-34 Ford four cylinder engine has been unofficially dubbed the Model 'C.' This designation cannot be found in Ford literature or correspondence. It is strictly a user connotation. Changes from the 'B' to the 'C' engine includeed: a crank shaft employing integrally forged counterbalances, a shortened three bolt water water pump housing and a 39 pound flywheel compared to a 62-1/2 pound flywheel provided with the Model 'A.' (The counterbalances make up the difference.) There were 263,765 Model 'B' (and 'C') engines produced between March 9, 1932 and late 1934