Yes, it is possible to convert a manual into an automatic. I converted my automatic integra into a manual. It runs smooth as silk. To tell you the truth and not to discurage you, it would be easier to sell your manual or even trade it for somebodys automatic. There are many Integra lovers that would love to get their hands on a manual. If this is not possible here it goes. It will be even more expensive to convert to an automatic than it is to convert to a manual.Why? There are more electoronic components involved versus the manual.(sensors, shift lock, ect.) These are the parts: 1: Automatic transmission with sensors 2: torque converter and plate 3: automatic mid shaft(manual's is different) 4: shift cable 5: automatic pedal set (brake and gas) 6: automatic shifter complete with interlock switch and harness 7: automatic cluster 8: automatic ecu 9: automatic flywheel cover 10: rear transmission bracket and the lower transmission bracket( the manual ones is different ( trust me I know) You will also need the top transmission mount and the top transmission frame bracket that you can purchase at Acura for about $50. You will have to cut the manual off the frame, grind the welds down and weld the auto bracket in place. 11: You will need a wheel saw to cut away at the center console where the manual shifter is. you need to make room for the manual shifter and the shift cable 12: The center shift console needs to be changed as well. The manual one is smaller. 13: You need the auto flywheel plate bolts, the manual one are longer. 14: you need the automatic starter as well. 15: you need the automatic radiator, the manual one does not have the tranny oil cooler in it. 16: The only other thing brother is the electrical. You need to run two wires to the shift lock, the reverse wires to the auto shifter, the cruise controll to the auto shifter and you should be set and ready to cruise. Now the only thing left is for who to do the install?
Copyright © 2026 eLLeNow.com All Rights Reserved.
