How do you replace wing mirror 407?

Tools you will need - couple of allen keys/hex wrenches, flat surface (kitchen knife will do...) and a 13mm box spanner.

1. Window and mirror switch fitting - remove small rubber cover in recess. Remove screw. Lift out fitting, disconnect wiring.

2. Remove courtesy light from under the door - disconnect wiring

3. Carefully prise off the trim around the door handle

4. Undo two black hex screws at the point where door joins central pillar.

5. Carefully prise off door trim - start at bottom/sides. Lift upwards to remove when all snap catches are undone

6. disconnect mirror wiring assemble and rubber grommet. Feed wiring into door hollow

7. Use box spanner to undo nut securing mirror to the door - the hole is usually covered by a square of sticky tape.

8. Remove mirror and wiring.

Replacement is the opposite, although ensure you have something to pull wiring back through the holw - bent coathanger or some such thing will work