1978 Chevy K10 neutral safety switch location?

The neutral safety switch is located on the steering column where it passes through the firewall on the inside. There are four wires coming out of it. To access it you must remove the small lower dash panels under the steering column, remove nuts holding steering column up to dash, remove four bolts that hold the bracket to column, remove ignition switch mounted on top of column, unplug large plug to lower right of ignition switch on steering column, pull switch out of way while paying attention to ignition switch rod coming from actual key switch and how it goes together. Not sure how to actually remove switch, but I don't think it is too hard. It is a relatively inexpensive part, hardest part is reaching it without tearing more apart. Shouldn't be to big of a problem all in all.