Can you make a bed with the back seats of a Honda cr-v 2000?

You can adjust the front and back seats to make 2 beds! Remove the headrests from both front seats. Move both seats forward while out of the car. The seats will almost push up against the dash. Recline the seats all the way back, then raise the handle while pressing down on the seat back and with some force you can press the seat flush with the rear seat. Find the handle on the outside of the rear seat just under the cushion next to the door jam. lift the handle while pulling the back of the seat forward. This will lift the back bottom of the seat up while the front hinges. Lift and release the handle while continuing to lift until the seat locks. this should now position the bottom of the back seat in line with the back of the front seat. Lift the knob on the rear seat next to the headrest and push the seat backwards. You should now have a bed with a slight incline. Enter from the back doors and sit on the seat bottom of the back seat while swinging your feet in and placing them into the front seat cushion with your head on the rear seat back.