How do you replace a turn signal relay on a 1998 Oldsmobile Aurora?

signal relay changeoutBoth the turn signal relay and the hazard flasher relay are located in clips on the steering column. To access them, remove the plastic cover under the dash (drivers side footwell)and using a light locate the silver colored(with yellow stripe) relays. Activate the hazard flasher so you can determine which relay is the one for turn signal and gently remove it from its clip. Carefully remove the connector (may have to gently pry off with a flat bladed screwdriver)and replace with the new one. Replace the relay back in its clip and replace the plastic panel and you're done. Hint....before replacing the cover, try the signals to ensure the correct relay was in fact changed)