What are the parts functions in a boring machine?

*Base-

is a foot or base of the drill tool, which is usually made of cast iron, which functions to provide stability and to support the upright column.

* Table

is a work table to put things on to be drilled. Surface of the table can be 90o angle formed with the column, and can be moved up, down, angled and rotated on the column . The form of a table can be round or square.

* Drilling head (head gear)

is the head gear that is attached at the top end of the column. This section consists of components that raise or lower the spindle. Spindle axis is not rotating, but will only move up and down inside the head

At the lower end of the spindle is the chuck, which serves to hold the drill bit.

* Power transmission

is the part that transmits power which comes from the electric motor. This is transmitted by using a pair of opposing pulley stacks and a V-belt. With a combination of comparative size pulleys the speed of the spindle can be adjusted.

* Hand-feed lever

is a tool that is used to control the up/down movement of the drill spindle.

* Depth stop

regulates the depth of spindle movement.