Where is the Airbag Reset Switch on the Nissan Quest?

I was able to reset mine 1996 quest. this sounds crazy but it worked. with the drivers door open find the button switch that says the door is open. press and hold it with your left hand. put the key in the ignition and turn it to the on position (do not start it) with the key in the on position click the (door is open) button at least 7 times in 5 seconds. turn the key off, remove it, close your door, key in and start it. the light should go out in a few seconds. I know this sounds silly. if it doesn't work for you tell nobody. if it does you too can try and over explain how it is a for real bag light reset.

good luck

Scott - Lorton, VA

I can hardly believe it, but it worked on a 1997 Mercury Villager. Thanks, Jerry- Knoxville, TN

Thank you it also worked good for me on my 1994 Mercury Villager, Thanks a million Scott.

Note: It is very important to do it exactly like Scott says or it won't work, including closing the door at the end before restart the vehicle.

Jesse

- Centralia, Illinois.