How do you set the time on armitron wr165 womens watch?

Starting with the top left button and going clockwise are the buttons a, b, c, and d. Begin by holding the d button until it flashes. Continue by pushing the d button again to go to the time menu. Pushing the a button to switch from seconds to minutes to hours. When on the appropriate increment of time pushing the b button will change the time.

New Answer:

Abridged instructions for the Armitron 45/6967

FYI the WR 165 is not the model number; it only indicates that the watch is water resistant to 165 ft.

A /set adj\ B

C \mode EL/ D (light)

To set the Alarm/ Time/ Date:

1) Alarm: Push and hold C- the first mode is to set the alarm.

A switches between hours and minutes indicated by the numbers flashing.

B advances the hours and minutes.

2) Time & Date: Push and hold C (to set alarm) push C again to set the time & date indicated by the seconds flashing. What is flashing is what will be adjusted.

*This mode starts with seconds, Pushing A cycles through Time and Date.

Pushing A (number of times) takes you to:

(1) minutes, (2) hours, (3) month, (4) date, (5) day of the week.

Pushing A again will take you back to the start with seconds so if you miss what you want to adjust just cycle through until you come back around.

B advances whatever is flashing (except seconds, it just zeros it out). If you are in 12-hour mode PM is indicated with a P above the minutes; AM is blank.

To turn on/ off the Alarm and Hourly Chime:

1) Push and hold B- this will tell you what time the Alarm is currently set to go off. *Note this is not how to set the alarm, see above

While still holding B push A to turn on/ off the alarm and hourly chime.

What is on is indicated on the bottom of the display:

----> AL<- Chime off * Alarm on

---->CH AL<- Chime on * Alarm on

---->CH <- Chime on * Alarm off

----> <- Chime off * Alarm off