How do you replace the spark plugs on a Ford contour V6?

Luckily, all spark plugs are available without removing the intake manifold. Tools you will need are:

ratchet set6"-9" extention 3/8" drive (6" with an added 3" drive will work just as good)sparkplug socket

First start out by removing the black plastic cover over the front intake manifold, there are three cap screws that you must remove using your ratchet set. This will expose three of the six spark plugs and respective wires.

Next, follow the spark plug wires back to where they attach to the coilpack, note the other three spark plug locations just under and forward of this coilpack, there are your other three spark plugs.

It should be pretty much self explanitory from here on out, but just remember it is easiest to do one wire and plug at a time, so as to match up the wire with the correct size and avoid dealing with the possibility of matching up the coilpack with the wrong spark plug, then your car will definitely not want to run.

Hope this helps, let me know if you need more help.

Seneca Johns