How do you program the remote to the tv?

Myrio Remote Setup1. Press a device key once.

2. Press and hold SETUP until the red LED blinks twice, then

release.

3. Enter 9 9 1, then the device group number (see table

below). The LED blinks twice.

4. Aim the remote at the device and press Power. The

remote sends IR codes from its library to the selected

device, starting with the most popular code first. If the

device responds, go to step 6.

5. If the device does not respond, press CH+. The remote

will try the next code. Continue until the device responds.

Note: Press CH- to try the previous code.

6. To set the code, press SETUP once. The LED blinks twice.

7. To search for other device codes, repeat steps 1 to 6.