Remove steering column 1995 ford van?

Disconnect battery.

Wait 10 minutes, then remove airbag module (if equipped) and horn pad.

Remove steering wheel.

Pull off plastic trim panel below steering column.

Turn ignition key to run (not start) and press lock tang to remove lock cylinder.

Remove steering column lower shroud.

Remove steering column upper shroud.

Remove multi-function (turn signal/wiper/hazard) switch.

Remove metal 'knee brace' bracket below steering column.

Disconnect all affected wiring including wiring to ignition switch.

Remove pinch bolt at bottom of steering column.

Remove 2 nuts and t bolts mounting steering column.

Note that it will now drop down and may pinch fingers or toes.

Remove column from vehicle.