How to change speedometer cable on Yamaha v star?

1) Unscrew the speedometer assembly from the top of the tank and undo the two electrical connections as well as the existing speedometer cable.

2) Unhook the gas line from the top of the tank.

3) Remove the two bolts holding the tank to the frame, making sure to safely tuck the choke cable out of harms way.

4) Remove the fuel line from the petcock, making sure the line is set to the off position.

5) Remove the gas tank and set it aside.

6) Remove the left frame beauty cover to expose the front of the frame.

7) Unscrew the speedometer cable from speedo gear at wheel hub.

8) Carefully pull the speedometer out of the frame from the bottom.

9) Replace the new speedometer cable, routing from the wheel hub up into the frame.

10) Replace all parts in reverse order.

There is not much room to route the speedometer cable, especially when you get to the neck of the frame. the gas tank and beauty cover must be removed if you hope to get the cable through.