Pop off the long inner trim strip (wood or aluminum) w/ a knife. You will see 2 screws near the center of the door, remove them. Remove the small (1.2 inch square) square plastic screw cover behind the inner door lever, and remove this screw, then gently remove the plastic trim surround. Carefully pop up the trim cover to the electric window control, lift up, then disconnect the electric control module. Then beginning at the bottom of the panel, using an upholstery tool, or a thin flat screwdriver (putty knife works well), gently lift the panel away from the door. There will be 2 clips at the bottom, and 1 each on each side. Once you have popped these out of their holes, the panel then lifts upward. Then disconnect the puddle light at the bottom of the panel, and you are done. Time involved...5 minutes.
Copyright © 2026 eLLeNow.com All Rights Reserved.