How do you connect from host 1 to establish a console session with router 1 using hyper terminal?

To connect from Host 1 to Router 1 using HyperTerminal, first, ensure that the correct serial cable is connected between Host 1's COM port and Router 1's console port. Open HyperTerminal on Host 1 and create a new connection, selecting the appropriate COM port. Configure the connection settings, typically using 9600 baud rate, 8 data bits, no parity, 1 stop bit, and no flow control. Finally, click "Connect" to establish the console session, allowing you to interact with Router 1's command line interface.