How do you adjust the watch band of a puritan watch?

Hi, If your band is the same as mine this is how you do it. My band has little arrows inside each link. The arrow shows the direction that the pins that hold the links together must be moved in to remove the pins and thus the links. To do this take a thumb tack and locate the end of the pin on the side of the band opposite the side that the arrow points to. You need to push very hard to get the pin to move. Once it does move it will stick out on the side Get some plyers and pull the pin the rest of the way out. Once you remove enough pins and links to get the band sized correctly, push the pin back in so that it is oriented the same as it was before. You will need to force the last bit of the pin in place. To do this I used the flat side of a standard screw driver. I hope this helps