How do you test and reset a GFCI receptacle?

GFCI (Ground Fault Circuit Interruptor) A GFCI receptacle can be tested with the built-in test button, which will cause a small ground fault, tripping a properly working device. GFCI receptacles should be tested monthly. GFCI receptacles can also be tested with a plug-in type GFCI tester. This tester has a GFCI trip button on it which accomplishes the same thing as the built-in test button. Your local inspector will usually test with this method. If your receptacle is tripped, it should reset by pressing in the reset button. If it doesn't, the device is wired incorrectly, has a faulty load plugged into it, or is simply in need of replacement. ---- IF YOU'RE NOT ALREADY SURE YOU CAN DO THIS JOB

SAFELY AND COMPETENTLY

REFER THIS WORK TO QUALIFIED PROFESSIONALS.

If you do this work yourself, always turn off the powerat the breaker box/fuse panel BEFORE you attempt to do any work AND always use a meter or voltage indicator to insure the circuit is, in fact, de-energized.