How do you replace the water pump on a 1993 Mercedes 190e 2.6?

1. remove the air filter box and upper radiator hose.

2. remove the top of the water pump and the thermostat.

3. Take off the water pump and power sterring pump pulleys.

4. Remove the Power Steering pump and move it to the right with hoses attached.

5. Loosen the belt tensioner and push it down to get to the 4 water pump bolts. Three are 13 mm and one is a 6 mm allen. You will have to use an extension with u joint for at least 2 of the bolts.

6. Be patient and you will do it.

7. One more thing. Take out the bolt that holds the dip stick. This will give you more room.