How do you remove the bolt on a Cooey Model 60 22 caliber rifle?

First, verify that the rifle in unloaded by checking the chamber, breach face and magazine.

Next remove the barrel/action from the stock by unscrewing the knurled nut on the bottom of the stock. On the similar model 600 Cooey a slotted screw was used instead of the knurled nut.

On the bottom of the action there is a threaded rod with a nut on it. Using the proper size wrench loosen this nut and unscrew the threaded rod until the tube magazine drops down enough to disengage from the bottom of the rifles bolt. pull the bolt to the rear (it will go back further than normal at this point) and then pull the trigger and keep it to the rear while withdrawing the bolt from the rifle.

Reassembly is the reverse of the above, taking care not to screw the threaded rod in too far or it will keep the tube magazine from moving back and forth as it should.

Hope this helps!

P.E. Islander