well since the starter is on the the bottom of the engine the easiest way is to pull the engine or getting it up on a lift and taking it out. BUT most of the time the easiest way is to pull the engine
I own a 93 and I just did it.... also I'm a mechanic sooo take off the intake and you can get at it easily
On a 1993 the starter is easily removed with only two nuts and two bolts. Remove the large nut on the large wire from underneath. Remove the lower starter bolt, using and extension have someone looking from the top observe the socket and the bolt head have them direct the socket to find the head of the bolt. It hard to see and they have to look through a small slot in the manifold. Remove the bolt. Lower the starter and remove the last small nut holding the wires. PS I'm not a mechanic.
Copyright © 2026 eLLeNow.com All Rights Reserved.