How do you replace a turn signal bulb 2005 Montana?

To replace the front turn signal bulb in a 2005 Montana, you have to access it from the engine compartment. Undo the front headlight assembly as per the instructions noted elsewhere. There is one screw (machine Head) on the outboard side of the headlight assembly, and one 'thumb screw' on the inner side to the assembly. I found it difficult to remove the headlight assembly, and I have found you don't have to. (You can break the housing, so don't try taking it right out) Just loosen it enough to get your hand behind the assembly. I would also suggest you remove the plastic fasteners from the top of the front bezel in order to make loosening the headlight assembly easier, and to prevent the possibility of damaging or breaking the front bezel. The plastic fasteners are easily removed with just a pair of pliers. Once the headlight assembly has been moved forward slightly, you can get your hand down the opening, and feel for the turn signal lamp assembly. Twist to remove. There is enough wire in the harness to bring the lamp assembly to 'the surface' where you can replace the bulb easily. Replace bulb and test. After testing, replace headlight, and then plastic fasteners at the top of the front bezel.