How do you disassemble an above ground pool?

If you plan on relocating the pool, you will want to carefully remove all screws and place in zip-lock type baggies and label them. But first you must empty the pool of all water.If there is an in wall skimmer you remove that. When replacing the skimmer later you will need new gaskets. Then start by removing the top rails then the uprights then the wall. Lift the wall while still bolted up and over the bottom rail/track so as not to damage the track. Then once wall is in the inside of the rail/track you can remove the track/rail the wall was in. If this is rotted it can be purchased, just check on google for a search of parts. Then you unbolt and roll the wall and tie it up and you are ready to go. You will need a new liner. Most instructions for old pools, filters etc are available on line....just search as needed.