How do assemble a bunk bed?

Most futons are very similar. So you should be able find a seat, a back section, two rails and two arms, as well as rollers, washers, cotter clips, metal inps, nuts and bolts, etc.

So what you need to do, first, is locate the holes drilled into the back rack. Take the nylon rollers and push a metal pin through the smaller end then insert the assembly into the holes on the back rack. Place one of the washers over each pin and secure with a cotter clip.

Now, connect the back rack to the seat. Line up the holes on the seat section with those on the back rack and push a metal pin through each role from the outside. Fix a washer with the cotter clip two pins. The seat and back rack assembly can now be moved between the arms and lined up with the routed out grooves in the arms. The back stretcher now connects to the alms with two bolts on each side and the barrel nuts are inserted into the holes in the stretcher rail. Tighten all the bolts as much as possible.

Your futon should now be assembled and ready to use