How do you separate a transmission from the engine on a 92 Nissan Sentra after everything is removed?

Hi, are you working with a Manual, or Automatic Tranny?

1st make sure you have the brackets under neath that bolt to the dust cover on the bottom of tranny taken off. If all your other bolts are out then you just use a big flat head screw driver to pry it apart, then it should come right off.

I just did my automatic, that I had to put a new motor in. It was a little trickier than the 5 spd I have. And a lot heavier tranny. So get a friend to help you if it's an auto.

Pretty simple let me know if this helps.