How do you remove front seats from a 2001 ford ranger?

I just did this yesterday, First you need to disconnect your battery to prevent setting off your airbags if equipped. Dont forget to wait about two minutes before you start work, this will also prevent you from airbag problems. You will need a T-55 torx bit for the seat mounts.. The seat belt anchors will require a smaller torx bit also. When you get the seats unbolted use a small flat head screwdriver to separate the electrical from the seats. Dont just pull them out because you will cause more problems then you need. Your going to need to pull the belt buckles through the slots on the side of the seats. That should be the last step. Be sure to put a small amount of anti seize on the threads and clean out the floor threads before reinstalling the bolts.