How do you change a 1998 rodeo bumper?

I've done it but it was years ago and I'm working from a poor memory. The grill has to come out to give you access to the fasteners holding the plastic bumper cover on. They are held by an ingenious little plastic clip that you access from the front of the vehicle. These "Clips" have to be rotated 90 degrees to unlock them and there are 8 or so total to undo. Look around the edges of the grill and you will spot them. once you get access to the bumper cover there are screws on the top and bottom of the cover that must be removed to get access to the bumper structure. The "bumper itself is pretty easy to replace as it is just bolted to the frame; getting access to it is the trick I think I also remove the headlights to allow access to the bumper cover as well. Good luck.