How do I properly install an SRAM rear derailleur on my bike?

To properly install an SRAM rear derailleur on your bike, follow these steps:

1. Begin by removing the old derailleur if necessary.
2. Attach the new derailleur to the derailleur hanger on the bike frame using the provided mounting bolt.
3. Connect the derailleur cable to the derailleur and adjust the cable tension using the barrel adjuster.
4. Set the limit screws on the derailleur to ensure proper shifting range.
5. Test the shifting by pedaling the bike and adjusting the cable tension and limit screws as needed.
6. Once the shifting is smooth and accurate, tighten all bolts securely.

It is recommended to refer to the specific installation instructions provided by SRAM for your particular model of rear derailleur for more detailed guidance.