Can you demonstrate how to safely cross-cut on a table saw?

To safely cross-cut on a table saw, follow these steps:

1. Adjust the blade height to slightly higher than the thickness of the wood.
2. Use a miter gauge or crosscut sled to guide the wood through the blade.
3. Stand to the side of the blade, not directly behind it.
4. Keep your hands away from the blade and use a push stick to guide the wood.
5. Wear safety goggles and hearing protection.
6. Make sure the wood is flat against the table and fence before cutting.
7. Turn off the saw and wait for the blade to stop before removing the wood.

Always prioritize safety when using a table saw to prevent accidents and injuries.