What is the value of compensating resistor needed for a non inverting op-amp circuit using 10k resistors for both ri and rf?

In a non-inverting op-amp circuit, the gain (A) is determined by the ratio of the feedback resistor (Rf) to the input resistor (Ri) using the formula ( A = 1 + \frac{R_f}{R_i} ). With both Ri and Rf set to 10kΩ, the gain would be ( A = 1 + \frac{10kΩ}{10kΩ} = 2 ). If you are looking for a compensating resistor to balance or adjust this gain, it would depend on the specific requirements of your circuit, but typically, no additional compensating resistor is needed if the desired gain is already achieved with the chosen resistors. Adjustments can be made if a different gain is required.