How do you change the stator on a 1999 Yamaha warrior 350?

on the left side of the motor there is a cover with 4 bolts, pop that off and take the bolt out that is hiden by the cover, after u take the bolt out then take out the bolts holding the big cover on, after u get those all out which is probly 10 bolts take a rubber mallet and start taping the sides tobreak the seal, then slide off the cover u might have to pull hard cuz the fly wheel wants to hold it after u do that look at the cover and the stator is on the inside of it held on by 3 screws if yours is like mine where the screws strip just take a vice grip and clamp on to the srew and brack it loose u might have to drain oil first cause oil is in the stator case check timing and tension of timing chain while your at it