How can I effectively use a Dunlop valve pump to inflate my bicycle tires?

To effectively use a Dunlop valve pump to inflate your bicycle tires, follow these steps:

1. Remove the valve cap from the Dunlop valve on the tire.
2. Open the lever on the pump head to ensure it is in the correct position for the Dunlop valve.
3. Press the pump head onto the valve firmly to create a seal.
4. Begin pumping air into the tire by moving the pump handle up and down.
5. Check the tire pressure using a pressure gauge and stop pumping when the desired pressure is reached.
6. Close the lever on the pump head and remove it from the valve.
7. Replace the valve cap on the Dunlop valve.