How do you hard reset my ipaq hx2110?

Resetting the Device

Sometimes there is a need to reset your Pocket PC. Resetting the

device is known as performing a "soft" or "hard" reset.

Performing a Soft Reset

A soft reset stops all running applications, but does not erase any

programs or saved data. Be sure to save any unsaved data within

a running application before performing a soft reset.

Perform a soft reset to:

â– Stop all running applications

â– Install a new application

â– Restart the Pocket PC if it stops responding

To perform a soft reset:

1. Locate the recessed Reset button on the bottom of your iPAQ

Pocket PC.

2. Use the stylus to lightly press the Reset button.

The Pocket PC restarts and displays the Today screen.

Performing a Hard Reset

Perform a hard reset only when you want to clear all

user-installed settings, applications, and data from RAM

(Random Access Memory), where data and applications you have

loaded are stored.

CAUTION: If you perform a hard reset, your Pocket PC loses all data

and programs not saved in iPAQ File Store.

To perform a hard reset:

1. Press and hold down the Calendar and iTask buttons.

2. While holding down these buttons, use the stylus to

lightly press the Reset button on the bottom of the iPAQ

Pocket PC for about two seconds.

3. When the Pocket PC screen begins to fade, release the

Calendar and iTask buttons first, and then remove the stylus

from the Reset button.

Note: If you simultaneously push and hold the Reset, Calendar,

and iTask buttons for more than two seconds, the battery

disconnects. To restart the device, either plug the device into the

AC Adapter or press the Reset button again.

After performing a hard reset, you may need to reinstall

applications stored in iPAQ File Store to restore shortcuts and full

functionality.

4. The Pocket PC resets and powers on.

To return your iPAQ Pocket PC to factory settings after

performing a hard reset:

1. Tap Start > Programs > File Explorer > My Device.

2. Tap the iPAQ File Store folder to open it.

3. Tap Edit > Select All.

4. Tap and hold the selected files, then tap Delete.

5. Tap Yes to delete all file in iPAQ File Store.

Clean Reset

On Windows Mobile 2003 SE products, a hard (full) reset clears all user-installed settings, applications, and data from RAM (Random Access Memory), where data and applications you have loaded are stored. A full reset should be performed only if a normal reset does not solve a system lockup or failure. A full reset returns the unit to the factory defaults. Remove AC power before performing a full reset.

NOTE: Data in the iPAQ File Store is maintained following a full reset. For all other data, users must restore data from an expansion storage card or PC ActiveSync backup after performing a full reset.

On Windows Mobile 5.0 products, a hard (full) reset stops all running programs, but does not clear user data or applications because they are stored in ROM (Persistent Store feature). A hard reset also resets all hardware registers. Users can perform a Clean Reset, in which the product is cleared to its factory defaults. A clean reset returns the HP iPAQ to the default Windows Mobile 5.0 settings with no user data or applications.

To perform a clean reset please follow these steps:

# Press and hold the Calendar button, the Powerbutton, and the Messaging button.

# While holding these buttons, use the stylus to lightly press the Reset button on the bottom of the HP iPAQ.